Pricing depends on several factors such as the type of turf, size of the area, site access and prep work. We offer free, no-obligation consultations to give you a clear, customized quote.
For most residential projects, installation takes about 2-3 days depending on the size and complexity of the project.
Typically, we can begin 2-4 weeks after the turf is ordered. Timing can vary based on the season and our current schedule.
Get premium turf without delays or hidden fees—just honest estimates and reliable turnaround.
Cost & Time
Maintenance
Our turf is built to stay clean, green, and beautiful with minimal upkeep.
No—our synthetic turf creates a barrier that prevents weeds from growing through it.
Not at all. Our turf system deters pests from digging through.
Turf can warm up in direct sunlight, but ForeverLawn® products are designed to adjust with surrounding temperatures to stay comfortable underfoot.
(1) We start by removing any existing grass and soil
(2) If needed, we install a perimeter nailer board
(3) We then add and compact a base layer of stone
(4) The tuf is rolled and trimmed to fit your space
(5) We secure the turf and join the seams
(6) If your turf requires infill, we apply and brush it in
(7) Finally, we groom the surface and do a quality checkYes! Installation can happen during the winter as long as it's dry and temperatures are consistently above 32 degrees.
Light rain usually isn't an issue, but heavy rain can delay the process, especially during the base prep and turf laying.
Almost anywhere! Common areas include:
• Front and backyards
• Pool areas
• Pet spaces
• Playgrounds
• Putting greens and bocce courts
• Sports fields
• Rooftops and balconies
• Commercial landscapes
• Indoor spacesYes, it can. On steeper slopes, we may take extra steps to secure the turf and prevent any shifting or erosion.
Yes—we can provide DIY instructions. But for best results and to qualify for our warranty, we recommend having it professionally installed.
From site prep to final touches, we handle it all—so you can enjoy your new surface sooner.
Installation
We usually excavate 3 to 4 inches to allow room for the base material and proper drainage. Some projects may need more or less, depending on the conditions.
We use a 3–4” layer of compacted crushed stone for stability and drainage. A perimeter nailer board is added along the edge to help secure the turf.
ForeverLawn® turf has a perforated backing that drains water quickly—more than 50 gallons per minute—allowing it to flow through to the base and ground below.
We typically use a 3/8” chipped limestone. It’s clean, compactable, and offers great drainage and stability.
Turf is usually attached to the perimeter nailer board with stainless steel staples, though the method may vary depending on the product and edge design.